RMC1 Skirt Clamp

RMC1 Skirt Clamps provide a cost-effective solution to material spillage problems in your conveyor loading zones. A good material containment system at the loading point reduces conveyor problems and saves cleanup costs.

Features and Benefits

• No-hassle installation with few parts and complete step-by-step instructions
• Safe service access - installation and maintenance work can be done safely from the sides of the conveyor
• Quick adjustment using the locking wedges on the clamp pins
• Anti-vibration pin ensures pin remains locked
• LS (Limited Space) model available for restricted-space areas and for portable equipment
• Pick-A-Length (PAL) PAK option for special or longer length requirements
• Bolt-On PAL PAK available when welding is not an option

Specifications

• Module Sizes: 4' (1200 mm)
• For a range of skirt rubber heights; for thicknesses from 5/16" to 3/4" (8 to 19 mm) thick
• Overall Height:
  • Standard: 7" (180 mm)
  • LS: 4.5" (115 mm)
• Pin to Clamp Bar:
  • Standard: 4" (100 mm)
  • LS: 2.5" (65 mm)

Installation

• Skirt board and rubber not included
• One Skirt Clamp includes two clamp plates (Standard or LS - Limited Space), two clamp pins, and one 4' (1.2 M) clamp bar
• The Pick-A-Length (PAL) PAK contains 2 clamp plates and 2 clamp pins - you supply the clamp bar (1" x 1" x 1/8" angle) to your required length