- Mechanical fastener rating from 400 to 800 PIW (70 to 140 kN/m)
- Belts from 3/16” to 15/16” (5 mm to 24 mm) thick
- Pulley diameters from 14” to 36” (350 mm to 900 mm)
- Low-profile, Scalloped Edge® design is conveyor component compatible
- Wide, heavy-gauge plates promote long wear life, with a sift-free splice
- Rivet-attached for maximum resistance to pull out
- Compatible with troughed belts
Narrow your fastener selection options based on your specific needs Help Me Choose
| Fastener Size |
For Belts With
Mechanical Fastener Ratings Up To: |
Belt Thickness Range |
Recommended Minimum Pulley Diameter |
Operating Tension
75-100% of Belt Rating |
Operating Tension
50-75% of Belt Rating |
Operating Tension
Under 50% of Belt Rating |
| |
P.I.W.
|
kN/m
|
in.
|
mm
|
in.
|
mm
|
in.
|
mm
|
in.
|
mm
|
BR6
|
400*
|
70*
|
3/16-21/32
|
5-17
|
14
|
350
|
12
|
300 |
10 |
250 |
BR10
|
650
|
|
7/32-11/16
|
6-17
|
18
|
450 |
16 |
400 |
14 |
350 |
BR14
|
375
|
140
|
13/32-15/16
|
10-24
|
36
|
900 |
34 |
860 |
34 |
860 |
* Contact Flexco Engineering for applications greater than 400 PIW (70kN/m).
FASTENER METALS AND AVAILABILITY
To maximize fastener service life, fastener material must be matched to the application. Flexco manufactures fasteners from a broad range of materials. Our selection makes it easy to specify a fastener that will deliver maximum performance in a variety of conditions—from wet and abrasive applications to highly corrosive environments.
Galvanized Steel: For basic applications, galvanized steel is recommended. It is magnetic, offers good abrasion and rust resistance, but is not recommended for corrosive environments.
Stainless Steel: Stainless steel provides extra resistance to abrasion, magnetic attraction, and corrosion from acids and other chemicals.
MegAlloy®: Features superior resistance to wear and abrasion. Provides several times the service life of steel. Not recommended where
impact of corrosion is a problem.
Everdur: A corrosion-resistant copper and silicon alloy. Fully non-magnetic and spark-free, low in resistance to abrasion.
| Fastener Material |
Magnetic |
Abrasion Resistant |
Chemical Resistant |
Rust Resistant |
Sparking |
| Galvanized Steel |
Yes |
Good |
Poor |
Fair |
Yes |
| Stainless Steel (400 Series) |
Yes |
Good |
Fair to Good |
Good |
Yes |
| Stainless Steel (300 Series) |
Slightly |
Good |
Good to Excellent |
Excellent |
Yes |
| MegAlloy® |
Yes |
Excellent |
Poor |
Poor |
Yes |
| Everdur |
No |
Poor |
Poor |
Poor |
No |
- Portable tooling
- Choice of hand or power installation